dtt or ats trans builders

[aarcuda]

i,am from nw arkansas is there any good dtt or ats trans shops around this part of the country

 

[Bob Wagner]

your best bet for dtt information would be to either call DTT 1 866 504 4002



They have trained installer in most parts of the country



You will really enjoy a modified auto transmission





enjoy the ride

 

[pwr2tow]

Check out this site www.atsdiesel.com or call clint at 1-800-949-6002.



Made in the good ol U. S. A.



Just click on the blue url.



Ron

 

[TxDieselKid]

There is a DTT installer in Dallas that I drove to get to. His name is James, and he is even a TDR member(inarush76).



He has been building automatics for 27+ years. If he thinks DTT is the way to go I have NO room to debate.



You won't be sorry.



Andrew

 

[Jamie Attridge]

Originally posted by ronsram1999





Made in the good ol U. S. A.





Ron

That kind of comment is what starts transmission wars.





FYI DTT parts are also made in the USA.

 

[pwr2tow]

Originally posted by Jamie Attridge

That kind of comment is what starts transmission wars.





FYI DTT parts are also made in the USA.

Giveing information,Yes, Starting a transmission war, No. Some people read more into information than what is there. If you want a transmission war I'am out of here, see yah!!!



FYI, Some DTT parts are farmed out to the USA and sold through DTT back to the USA, gotta love the cycle. 6 of one kind half dozen of the other.



Ron

 

[Mark_Kendrick]

There's an ATS installer in Ft Worth too

 

[1sand0s]

You know there can be a halt to transmission wars...

Rip the slush box out and put in a standard.



Gotta love it!!



Maybe we should start a thread on who is the best standard builder out there.



Milk and cookies will be served at the back of the class... .

 

[mcoleman]

AARcuda there is a DTT builder about 2 1/2 hours from Springfield Mo up I44 if that helps any.

 

[rrausch]

I spend a lot of time in Monett, in S. W. Missouri--I grew up on a farm there! Good to see some fellow Ozarkers here!



While I drove to Denver for my ATS, I would suggest you call Clint at 800-949-6002.



I was at ATS in Sept. I saw a map of the U. S. on their wall, and it had hundreds of little colored pins--stuck in every state--those were the transmission shops they had dealt with who had installed the ATS! I'm sure they have somebody closer to you than Dallas or Fort Worth.



I would go with ATS again in a heartbeat! Personally I feel their engineering is the most thorough out there. That TripleLok will NOT slip, I don't care how much HP or Torque you are making.



Good luck. Let us know how it goes!