Competition dyno event in eastern north carolina

[king24v]

we have a dyno event set up in jacksonville north carolina for oct 11 on a mustang dyno. ther will be an optic sensor as well for torque readings. there will be all makes there dmax powerchoke and dodge i hope. there is also a drag strip just down the road about a mile or so and we hope to hit the strip after the event . any one interested fell free to post or contact me at -- email address removed --..... there will be one or two dmaxes there that should go over 600 hp, a few new ford 6. 0s with chips and hopefully some 7. 3s and a dodghe or two or three will show as well... . jess

 

[TURBOs4LIFE]

Hummm This sounds interesting! I might plan this trip!



T4L

 

[king24v]

Originally posted by TURBOs4LIFE

Hummm This sounds interesting! I might plan this trip!



T4L

let me know if you are interested aand i will send info and directuions thanks jess

 

[John_P]

king24v:



Just saw your post on this Dyno Event in Jacksonville, N. C.

I was wondering if you could tell me where this Mustang

Dyno is located?? Name of business, address etc. I live

in Holly Ridge which is about 18-20 miles from Jacksonville

and if someone has a Mustang Dyno then it must be fairly

new. The only business/person that we know of in or

around Jacksonville that has a dyno is "Wayne's Performance"

on Highway 258 near "Coastal Plains Raceway/Dragway. "

We have used Waynes' Dyno before, but it is a "Dynojet"

not a Mustang and he does not have the hook-ups necessary

to read torque. We would be interested in attending if you

can give us some more information. Aslo, where are you located?



Thanks!



--------

John_P

 

[king24v]

Originally posted by John_P

king24v:



Just saw your post on this Dyno Event in Jacksonville, N. C.

I was wondering if you could tell me where this Mustang

Dyno is located?? Name of business, address etc. I live

in Holly Ridge which is about 18-20 miles from Jacksonville

and if someone has a Mustang Dyno then it must be fairly

new. The only business/person that we know of in or

around Jacksonville that has a dyno is "Wayne's Performance"

on Highway 258 near "Coastal Plains Raceway/Dragway. "

We have used Waynes' Dyno before, but it is a "Dynojet"

not a Mustang and he does not have the hook-ups necessary

to read torque. We would be interested in attending if you

can give us some more information. Aslo, where are you located?



Thanks!



--------

John_P

hey sorry for the misinformation ,my mistake it is dynojet and it is wayne,i made a few runs there a month or so back and have been trying to set up this event for oct 11. wayne told me if i could get a food 4 or 5 trucks to come he would pyrchase the optic sensor for the torque readings,he sadi he needed a week to ten days to order the part still waititng for a turn out report so i can give wayne a call back,. . what hp did you turn..... thanks hope this helps and sorry for the misinfo ... . jess also i live in plymouth nc ,still digging out from isabel we took it pretty hard

 

[John_P]

Jess:



Thanks for your response. I will let the membership know

on the DTR site also. My son (banshee) had posted a link

to this thread over there too. He and I should be able to

make this and I know that "Papa Smurf(Crud)" said he

would attend too. We are looking forward to seeing

those "600 H. P. Duramaxes" you spoke of.



Keep us posted.



---------

John_P

 

[king24v]

Originally posted by John_P

Jess:



Thanks for your response. I will let the membership know

on the DTR site also. My son (banshee) had posted a link

to this thread over there too. He and I should be able to

make this and I know that "Papa Smurf(Crud)" said he

would attend too. We are looking forward to seeing

those "600 H. P. Duramaxes" you spoke of.



Keep us posted.



---------

John_P

hey john ,great hope you all can come,spun the rollers at 558. 9 last time at waynes and have a few tricks up my sleeve for 600 it will be close but i think i can get it... il put more info later ,looks like ther is enough interest to get wayne to order the optic sensor,so it all looks like a go... . il be in touch... . jess also could you tell me how to finf this dtr site ,always enjoy diesel related websites... . thanks

 

[king24v]

hey all interested talked with wayne and he has the sensor in,however he needs to shift the day from the 11th to the 18th ,. it seems he had a prior he forgot about when qwe set this up . hope you all can still make it... . jess