Here I am

dyno numbers

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Just ordered Southbend Clutch for G56

Tomorrow first trip pulling with the 06 automatic

Status
Not open for further replies.
Sorry first time with pic. 516. 7hp1016. 6t-523. 0hp1062. 6t-521. 7hp1057. 2t-526. 4hp1049. 8t I will talk to a friend that is better at posting and see if they can get a better pic up for me.
 
CBurnside said:
what are the mods that you have all i see are 80hp injectors?

Read down a little further! :-laf

2003 4x4 quad cab red 35" 3. 73 4"exh, twins, ats manifold, fass 150 ,boost,pyro pre,pyro post,trans,TST ,xm radio, full dtt trans and 80hp inj
 
Last edited:
catoiler,



I'm glad you posted that so I didn't have to put on my glasses. :-laf I think the question is:



What kind of box are you running, or are those numbers strictly on injectors, twins, and the fass?







Either way, those are nice numbers, jvjump.
 
TsT box. Im working with a friend to get a cp3 mod so i will not run out of fuel. It ran very flat dave was surprised. We tried to turn it up but it dropped off. Temps stayed down i need more fuel. It hardly even smoked. I know smoke is not power but old girl was running clean. ;)
 
catoiler said:
Read down a little further! :-laf

2003 4x4 quad cab red 35" 3. 73 4"exh, twins, ats manifold, fass 150 ,boost,pyro pre,pyro post,trans,TST ,xm radio, full dtt trans and 80hp inj

What it says right their TST! :D
 
By the way here is mine. I got it to 619 and 752 but lost the printout. so this is the next best one.

#ad
 
Last edited by a moderator:
what psi is your fass set to. from what i understand with you set up is should at least be 40psi... did i miss s/m is this with stock turbo? is this also with no fuel p box?
 
Status
Not open for further replies.
Back
Top