Here I am

Dyno #'s on an 03 H.O. with Edge EZ ?

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Quadzilla

Blackstone Oil Report Input Needed

Status
Not open for further replies.
I've done some searching and haven't really found any actual dyno numbers on the 03 305/555 Cummins with only the Edge EZ.



Has anyone got any actual dyno numbers on this combination stock and all five power levels with the Edge EZ?



I was wondering what the real world HP/TQ numbers were and how much more power the level 5 on the Edge EZ has over stock.
 
Do you have HP and Torque Numbers on Level Three?... and/or what were the torque numbers on Level 4? Did you have an aftermarket exhaust or Hi-Flow Air Filter on the test truck?
 
Does level #5 actually have more power or does it just smoke a little more then level 4??. Because i noticed it not to be much more powerful but it just burned more fuel and threw three codes.
 
CKurtz, Had my truck dynoed at Sliver State Motorsports in Las Vegas, edge box L3, came out at 355rwhp. They have a Dynojet model 248c. The reason I mention that is my son is a darn good mechanic and told me a truck dynoed on a Dynojet then a Mustang could have vastly differing numbers due to the type of dyno used. Beats the heck outta me, I'm new to this stuff!!
 
Made 339 at BD on lvl 6, with what is in my sig.

Made 257. 9 at PDR almost stock (aFe Drop in filter, straight pipe, 285x70x17 tires)
 
Last edited:
what was your stock #'s? I ran on a Dynojet 248c but I think it only had 2500lb wheels. My stock was 189. That seems way low!! I'm running a western diesel box, and as far as I can tell it is an edge box. on level 3 it was 285. level 5 was 298. There was about 8 of us, and all are number seemed a little low.
 
Status
Not open for further replies.
Back
Top