Engine/Transmission (1998.5 - 2002) Dyno - Smarty, Comp and 1.6's

[Gary - K7GLD]

OK, so I hope to get in some dyno runs on a Mustang Dyno in a few weeks. Question is, what settings to use for top power?



I have been running the Smarty on #8, and the max I feel comfortable with on the Comp is 5x2 for smoke and EGT control. The Smarty, without the Comp, smokes a lot when on #8 - haven't tried it on #9 with the Comp off - might try that next.



SO, has anyone tried a similar setup, and have any informed info - or, even an educated guess? :-laf :-laf



Before the Smarty, injectors and 4 inch exhaust (in other words, just the Comp), I pulled 327 HP and high 800 TQ - any guesses what the later mods will do - is over 400 HP even remotely likely or possible?

 

[Tiger Rag]

I did 387hp and 867tq with comp on 5x5 and 1. 5's. I haven't had a chance to get on the dyno yet with the Smarty but I will in 2 weeks. I've heard some say you'll lose a little hp with the Smarty if you have pretty heavy mods. I think I'll break 400 this time... ... . uh, um, well, of course I put twins on a couple weeks back and there's also the thing about the 155hp BD injectors I have on the shelf waiting to go in. Maybe there is another big meatball # hanging out there that I have a chance to hit... ... . :--)