Here I am

Engine/Transmission (1994 - 1998) early 98 12 valve fuel lines

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff
Status
Not open for further replies.
I cut 'em back to where they weren't rusted, cut the plastic off the lines on the frame, and installed suitable rubber lines. No more leaks. The supply line is bigger; I used boiling water to soften the line enough for it to slip on. Not optimal, but at my anemic fueling level, it don't matter.
 
I used some fuel injection hose from the local parts house. This hose has a lining in the hose. There is hose that is diesel fuel rated.
 
Status
Not open for further replies.
Back
Top