Edge boost elbow

[swivel]

After running the EZ on 3 for a few weeks and looking at 1350* (and backing out), I just installed the supplied boost elbow - was able to pull off the stock hose with factory clamp still on and install the EZ elbow. Should still be able to put the stocker back in using the factory clamp.



EGT temps went down quite a bit - Boost now reads about 33psi and I can just barely hit 1200* but it rises much slower now. Seems to cool down quicker as well. Anyone running an EZ without EGT guage might want to put the elbow in.



I swapped mine from under the truck without touching any stuff up top. Just reached up with a pliers and twisted the hose off at the clamp. Took about 10min.

 

[Prairie Dog]

Good info! You said your boost is now 33 psi, what was it before you installed the elbow?

 

[swivel]

about 25

 

[Floor It]

A buddy of mine can hit 37lbs on level 4 and 36 on level 3.



John

 

[RDietze]

?

what is the edge boost elbow?

what does it do?

what does it look like?





thanks much

ron

 

[Floor It]

Its a brass 90 degree elbow that goes into the turbo that is restricted to trick the wastegate so it doesent open until a higher boost pressure.



John