Here I am

Edge Ez1000 Question

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Very Special Cat "Test Pipe"

Camp ground antics and lessons learned....

Status
Not open for further replies.
i am wondering if the EDGE EZ1000 controls timming because i am also

interested in getting the crank timming sensor so if the edge only does

boost, and fuel pressure that would be a great combo. can anybody

give me some info on this, i would greatly appreciated. :rolleyes:



_______________________________________________________________



2004. 5 CTD, 325/600 , 4 x 4, 48re, 3. 73, k & n air intake, magnaflow, gages

boost, pyro, trans, rancho rs9000x shocks, westin stepbars , 27. 5/fer, bf

goodrich, AT, :D
 
EMurillo said:
i am wondering if the EDGE EZ1000 controls timming because i am also

interested in getting the crank timming sensor so if the edge only does

boost, and fuel pressure that would be a great combo. can anybody

give me some info on this, i would greatly appreciated. :rolleyes:



_______________________________________________________________



2004. 5 CTD, 325/600 , 4 x 4, 48re, 3. 73, k & n air intake, magnaflow, gages

boost, pyro, trans, rancho rs9000x shocks, westin stepbars , 27. 5/fer, bf

goodrich, AT, :D



The Edge EZ on the 3rd gens, only does pressure.
 
I am running the EZ with the crank sensor and it has worked great. About 1 MPG increase while towing, and a bit of performance bump. However, even with an EZ I recommend gauges, especially if towing. Sarge
 
Status
Not open for further replies.
Back
Top