Here I am

Engine/Transmission (1998.5 - 2002) EGT Question...

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff
Status
Not open for further replies.
I posted this question over in the 3rd Gen area and got no takers... Anybody here got thoughts about these questons?



I have a good friend that has a new '04. He installed a DD TTPM (probably made by Edge) and a EGT gauge. He also has a BHAF. His temps run very warm, as high as 1400° under a hard pull up hill with NO trailer. This seems too high for me. He has NO boost fooler elbow and was told he does not need one on a '04. Unfortunatly he has no boost gauge yet, so we have no way of knowing what he is getting.



The question:



1. Do the '04's need a fooler elbow?

2. Do the '04's run higher EGT stock than what we are use to seeing?

3. What temps are you guys seeing?

4. How many pounds boost do you get stock with no elbow and with an elbow?



Thanks, Paul...
 
Last edited:
Status
Not open for further replies.
Back
Top