Electric fans

[Spooled05]

Ive been wanting electric fans but still need to be able to tow so the flexalites were out of the question. I did some research and found people using fans out of the tarus sho cars , so i went to junk yard and picked up a couple. I fabed up a aluminium shroud and so far theyre workin really well!



#ad




#ad




#ad




Let me know what you guys think! I will prob. get a break so i dont have to weld as much and build the cages for fans out of alum. for a better look.

 

[Shadrach]

I wonder if you can find out the CFM rating of those fans? Nice job Shadrach

 

[Spooled05]

I would like to so if any one knows how i could get them tested i would be willing to do so. Ive read where they pull 2500 cfm on low and 4500 cfm on high each.

 

[JPul]

Spooled,



It might be worthwhile to put some rubber flaps on the back side in the big blank areas to improve airflow while cruising and towing. The fans are a bit of obstruction when crusing down the highway.



Very nicely done.



Jusat my thoughts



Regards, John

 

[S.Morris]

Nice job on the shrould and install.



IIRCC I thought the flexalit system was 5500cfm ea. ? or pair.

 

[Spooled05]

Flex-a-lite is 5500 cfm total

 

[MMeier]

4500 cfm each... ... been wrong before , but I don't see how . Might be fine now, lets see in 6-7 months when it gets hot again.

 

[Spooled05]

Ive been runnin them for a year in a make shift shroud all through the texas summer and have not had a problem. but im sure you know everything!