I recently had my transmission rebuilt with new TC, VB, put on 4" exhaust, and had the turbo rebuilt. Most all of this was done in vien b/c the issue I was chasing was in the transfer case. Any how... I now notice at 40 mph my "abs" light and "brake" lights come on, and stay on until I cut the truck off. I also noticed that my fog lights no longer work. I checked and found no visible blown fuses.
I also put in a 470 ohm resistor in the wiring harness to the VB in effort to get the trans to hold 1st longer due to the higher line pressure. I don't think this has anything to do with it but just putting it out there. I also have a new alternator and an edge comp box on the truck for about 2 years now. Any suggestions would be very much appreciated. Does anyone know where a guy could buy a good book with wiring diagrams and flow charts for my truck?
I also put in a 470 ohm resistor in the wiring harness to the VB in effort to get the trans to hold 1st longer due to the higher line pressure. I don't think this has anything to do with it but just putting it out there. I also have a new alternator and an edge comp box on the truck for about 2 years now. Any suggestions would be very much appreciated. Does anyone know where a guy could buy a good book with wiring diagrams and flow charts for my truck?