Here I am

Emergency, please help!

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Can't locate a sunvisor

2WD 1st Gen Puller Pics

Status
Not open for further replies.
Today I went out to start my truck so I could go to the parts store to get the o-rings for my leaky return and thermostat housings, and I think I completely blew out the return housing o-ring because coolant came spewing out really bad from under there.



I need and exploded view of the return housing assembly ASAP. I have to fix this in the damn school parking lot in the dark... WTF!!!!



I am so ****** off right now... :mad:



Thanks anyone for your help.
 
Hey Chris -



I have a Mopar '93 Service manual, has a picture of the t-stat and housing, but nothing shown on the return housing. If it will help you, I can scan the pages regarding the t-stat and email them to you. PM me & let me know your email and I'll send it your way . . .



Keith
 
If by return housing you mean the one on the block that holds the AC compressor and the bottom rad hose goes to it. . . well, actually it is the feed to the engine, not the return. Anyway, it seals to the block with a square cut o-ring 3906697.
 
Well, how'd it go? Break anything else? Inquiring minds want to know. Sounds like everything is crapping out for ya at once, Chris. Good thing about that is, it should last longer, and not have to worry about it blowing again for a while.



Daniel
 
Chill pill???



???



I'm not mad! I was just being quick... mabye I worded it wrong. I was just in my room for a minute to get some tools.



Sorry if that sounded wrong!
 
Status
Not open for further replies.
Back
Top