Engine parameters

[asptsman]

Just got my new Edge Insight. Where can I get a list of the engine parameters so I can set alerts in the Insite. For instance, I can monitor the DPF psi but i don't know where to set the upper limit alarm to warn me that something is going wrong. I've set the temps for the DOC and DPF sensors at 1400 degrees but i had some knowledge on that. Rail pressure is another number that i don't have any experience with. Someone must have a list of all of the parameters????

 

[martion007]

You don't want Your rail preasure to go over 26,000





2011 SLT diesel 2wd duelly, 68RFE, 373 rears

Full DPF deletes with H&S Performance mini-max chip

firestone airbags/ on the fly adjust

woodhouse dodge sleeper berth

110 gallon extra aluminum fuel tank

RV hauler

 

[AH64ID]

Is the motor stock? If so then you really wont get EGT's, rail pressure, boost to be too high. . Just let it run where it does. Coolant is really the only one that you may need an alarm on. 07-09 225°, 10+ 235°.

 

[Bob4x4]

Just got my new Edge Insight. Where can I get a list of the engine parameters so I can set alerts in the Insite. For instance, I can monitor the DPF psi but i don't know where to set the upper limit alarm to warn me that something is going wrong. I've set the temps for the DOC and DPF sensors at 1400 degrees but i had some knowledge on that. Rail pressure is another number that i don't have any experience with. Someone must have a list of all of the parameters????

The factory software will trip dtc's when any emission related parameters are exceeded,some will require more than 1 occurence to trip avoiding glitches to become a nuisance. Almost every thing is monitored these days even fuel flow off idle for an example