Exhaust Tips

[Archive]

I would like to install a stainless steel exhaust tip on my truck. I was looking at the "Megs" that Geno's garage sells. Has anyone installed these on their trucks? They look nice but I can't imagine that it just slips on over 8+ inches of tailpipe, yet has enough interference fit to hold it on. I'm looking for opinions before I buy one and can't slide it on without a sledge hammer or to have it slide off while rolling down the road. Any opinions would be helpful.

1999 2500 SLT 4x4 5spd. 3. 54 LSD

------------------

 

[Archive]

Well for one its chrome not stainless... well maybe its chromed stainless... I don't really know but BOMB it while your ay it. Actually if you've got even minor equip. there not to hard to get on, I think they're all a little different... maybe you'll get a perfect fit #ad
not like that stinking Brite Box ... what a horse#@&) deal that is #ad
my leads wre to dang short and for that kind of money #ad
#ad
#ad


------------------
'97-2500,cc,4x4,215hp,5-sp,3:53D80L/slip;62k 1/1/00,17-20 mpg city/15-17 hwy;Mods:K&N@10kmi,285/75's@42k,T-stat3934373@48k,BriteBox-egt/boost@62k;1 of the last stockers left... ready to BOMB! AKA-"The Green Hornet" by truckers on I-5,I commute alot Reno/LA @ pre-'74 Nv. Speed Limits!

 

[Archive]

Smoke... Santa brought me Geno's Monster Tip. It slipped on nice and snug without any problem. Looks real cool... nice and BIG and shiny. Good luck. AKchuck

------------------
FUNTON 1998. 5, 3500 Quad Cab Sport 24V,4X4, A/T (They pay me to shift gears!)Clearcoat Black, Mopar Mud Flaps with Geno's Crome tips and a Monster Tip, black back-up lights mounted under the bumper, Firestone Air Ride Rite helpers with a Bigfoot 10. 11 camper in the box for extra traction.

 

[Archive]

Bought one about a month ago. Slips right on and no problems, looks good to. Very happy with it and would recomend it.

------------------

 

[Archive]

Yep mine slipped on with just slight persuasion. Took all of two minutes. An added benefit I found was I no longer get soot on the side of the trailer. It wasn't even "bombed" yet when sooting up the trailer and after bombing still clean trailer.
Larry

------------------
Ram Rod
'96 2500 club cab 5speed 4x4 3:54 pacbrake combo gauge and most all factory options
35' holiday rambler 5th wheel
on order: '01 3500 quad cab SLT+ white/agate 6 speed 4:10 posi camper/ towing packages towing mirrors etc. etc.

 

[Archive]

Instead of buying a chrome tail pipe cover just take a good metal polish and the gavanized pipe will shine up real nice. If you have a small buffing wheel to attach to the end of a drill or dremel type tool, use buffing compound and it will shine like chrome.

------------------
99 QC Diesel,5spd, white,Luverne SS step bars, Mopar long mud flaps, A. R. E. cap with walk thru door, SS rock side panels, JC Whitney front bumper 14" guards, BED RUG box liner, diamond plate bed rail and bulk head covers.

 

[Archive]

#ad


Here's an exhaust tip: PIPE BOMB it!!!

BOMBING FREE FLOW STYLE


------------------
Evan A. Beck

98. 5 2500, 4x2, RC, ISB, A/T, SLT, 3. 54 LSD, Trailer tow, Aux. suspension, Forest Green/Driftwood, 53,516 miles, 01/21/00

4" "PIPE BOMB"--straight piped exhaust split into duals, with 4" x 20" chrome tips one on each side after the wheels, Jacobs E-Brake, K&N Filter (Scotty style), Auto-Meter Ultra Lite boost & pyro, turbo silencer ring removed, OEM foglamps, OEM roof marker lights, OEM 1-ton tailgate marker lamps, Sylvania Cool Blue® 9004 headlamp bulbs, Husky diamond plate toolbox, Line-X spray-in bedliner, Mag-Hytec rear end cover, painted exhaust manifold and turbine housing, and E-Brake elbow, plus other cosmetic modifications

"I'd Rather be RAMMIN' than STROKIN'"

"Journeyman B. O. M. B. Member"

Prez of NW BOMBers

Ground Zero--BOMB Page

 

[Archive]

TomCat, the Megs 4" dia. exhaust tip can either be purchased in polished stainless steel or chrome plated steel. I believe Geno's Garage use to sell it either way although, as of late, I believe they only sell the s/s version. The Monster exhaust tip is an extremely well made, heavy-duty, chrome plated steel tip. I have purchased and installed both the s/s Megs and the Monster exhaust tips (not simultaneously) prior to the purchase of my present exhaust system. Both of these tips were a rather tight slip fit onto MY tailpipe however, I elected to have a tack weld applied to each tip as an added precaution.

------------------
'98. 5 2500 QC 4x4, (Black) SLT Sport, ISB, LWB, 3. 54 LSD, A/T, Glasstite Vision II canopy, Line-X bed liner, 285/75R16 BFG A/Ts on 16x8 M/T Challengers, Warn 4X Boards, Mopar fender flares, front and rear NW Custom stainless steel/rubber mud flaps, Mag-Hytec diff. cover and trans. pan, Edelbrock IAS shocks, Mopar tow hooks, Jordan Research Ultima 2020 trailer brake controller, VDO Vision gauges, PIAA Dual Sport 900 auxiliary lights and Super White bulbs, BD exhaust brake and TorqLoc, Prime-Loc fuel filter relocation kit, "Scotty Air System", Hitco/Geno's exhaust blanket, Femco/Geno's EZ Drain oil pan plug, and Banks Stinger 4" dia. stainless steel exhaust system.

'00 Polaris 6x6

 

[Archive]

How about an exhaust tip for a 4" exhaust system?

I purchased Geno's Meg, and it didn't fit onto my pipe. I beleive it is more suited for a 3" or 3. 5" exhaust. The inside pipe of the tip is 4", and even with heating it in the oven it wouldn't work.

Craig

 

[Archive]

Smoke got mine from Geno's also but it was a loose fit. Ended up putting a small sheet metal screw on the bottom side of it. Looks good and well made. #ad


------------------
Mike Clay
98. 5 24V,QC,2500,4x4 SLT, Emerald Green, K&N filter Scotty Style, DD True Torque Injectors, ISSPRO EGT & Boost gauges mounted on A Pillar Smittybilt step rails, camper package, hd tow pkg, chrome rocker panels,Lund lighted visor, Reese 25k hitch. Towing a 30' Gulf Stream Sea Hawk 5th Wheel triple slide.

 

[Archive]

at first I used a 4" stainless turndown I bought at an 18-wheeler shop. then I went back and got a pair of 4 foot 5" stacks for my 99 24V and mounted those behind the sleeper and light bar on my haulin' bed.

Todd
cuminspwr@excite.com

 

[Archive]

Why would anyone want to draw attention to a big exhaust? I specificaly had BD replace the Chrome turndown that came with the 4" cat back with a straight black pipe.

Guess that's why I go by "Sleeper"

------------------
It's my wife's truck!
98 QC 2WD 5 Sp 3. 54 with stuff

 

[Archive]

Straight black pipe? I try to get as much shine as possible. I have a 5 inch turndown right now and I'm trying to find a 7 inch one. Bigger is better, shine is good.

------------------
99,4x4,slt,3500,5spd,
black,hoswel bale bed,
blue box,sraightpipe,
K&N,silencer ring removed,5 star aluminum wheels,brushguard,
blackouts,eclipse stereo,
matrix blue headlight bulbs,blazer blue neon fog lights,

-- email address removed --

 

[Archive]

I just mounted a Chrome Geno's Monster Tip on my 2001 3500. Excellent, solid construction and slipped on too easily. Slid it back off and applied some epoxy. Will also anchor it with a stainless steel screw.
Someone asked "Why would anyone want to call attention to their exhaust pipe?" Any women with a nice "tail" puts on a nice tight pair of jeans - AND YOU KNOW WE LOOK #ad
My truck has such a nice "tail", I wear a Monster Tip on it - AND YOU KNOW YOU LOOK #ad
#ad
#ad


------------------
2001 Ram 3500 dually, 4:10, auto, SLT+,anti-spin,custom side paint(parchment/cabernet red), Smittybar nerf step,Geno's stainless wheel well trim, tonneau cover, air dam, chrome monster tip, mud flaps/chrome tips,gauges coming for the birthday.

[This message has been edited by Millfly (edited 03-13-2000). ]