2nd Gen Non-Engine/Transmission FASS Questions

[TravisG]

I have recently bought a 02 2500 with a fass. I went to change out the filters this morning. The fuel filter is a wix/napa part # 1724 which I beleive is right, but after I read a thread from SteveD I am not sure. When I went to drain the water off of the seperator it looked to have a dent in the bottom from a rock or something. When I tightened it back up the whole bottom twisted off. #@$%! On Labor day nonetheless. So back to Napa and bought part # 3691. My question is I guess are these filters the right ones and will the 3691 work until I can get the right seperator from fleetguard which is part # fs1023 I think.



I appreciate you comments in advance. Please help out this 'ol 12 valve dinosaur in this new electronic world of 2002!! Happy Labor Day.



One more thing I am guessing I have the fass 150. How do you tell?

 

[LowFly]

I have recently bought a 02 2500 with a fass. I went to change out the filters this morning. The fuel filter is a wix/napa part # 1724 which I beleive is right, but after I read a thread from SteveD I am not sure. When I went to drain the water off of the seperator it looked to have a dent in the bottom from a rock or something. When I tightened it back up the whole bottom twisted off. #@$%! On Labor day nonetheless. So back to Napa and bought part # 3691. My question is I guess are these filters the right ones and will the 3691 work until I can get the right seperator from fleetguard which is part # fs1023 I think.



I appreciate you comments in advance. Please help out this 'ol 12 valve dinosaur in this new electronic world of 2002!! Happy Labor Day.



One more thing I am guessing I have the fass 150. How do you tell?

FASS 95 Series:

#ad




FASS 150 Series:

#ad




That Wix/NAPA Water Separator is what i call an "In a Pinch" filter. I would not run it long term..... because i believe its a 10-20um filter. Too tight for the suction side of our pump. We like to see 140-150um on the suction side. A strainer, not a filter.



The FS 1023 will be the correct filter. ALSO if the bottom twists off... unless its broken... its has 2 interference tabs that "Lock" onto the petcock that drains the water. Might see if you can just snap it back on... . i have seen that on some filters here in house when the fitting was not installed all the way.



If the filters you are posting up here are fitting, you have a 150 Series…. .

 

[AfterBurner]

off topic

anybody know which port i plug my fuel pressure guage into. I could just call, but never think about during business hours

forrest

 

[Hammer]

Here is where the fuel pressure port is located looking up at My FASS 150 on my 12v... ... Andy

 

[TravisG]

Thnx Dan from a former Missouri boy to a current one. I saw you at Scheids and meant to get some filters for the new ride. Beer must have gotten in the way or something! It is the 150, and I kind of figured that the wix was a "quick fix" thing. Thanks again for the answer.