Engine/Transmission (1998.5 - 2002) Fass System

[motohead84]

First off I want to express my appreiciation to all the TDR members for your various input on my little projects. on that note, here is the latest.



I want to install a FASS system to keep a good flow to my injector pump. i also would need to install a fuel pressure gauge. Question is, where do I get a FASS system for a good price and how easy is it to install myself? what range of fuel pressure gauge should I get. Right now I have the A-pillar full with a trans temp, EGT, and boost gauge. I would need a place to mount the fuel pressure gauge.



Thank you in advance

 

[Rob Thomas]

If you don't have heated seats, you can install a fuel pressure gauge in that cuby hole. You can install it yourself. Give me a call about the FASS.



Thanks, Rob

 

[Nickaru]

I just installed my FASS this last weekend and it does take a few hours to do it right. I had trouble getting the stock fuel line off the tank. After I got past that, everything else went smooth. I purchased mine from Doug at smokin diesel.com. Great to deal with. He will set it up with a relay, so the FASS pump won't overwork the original lift pump circuit and he did it for free! As for best price? They all seem to be around the same. Locaton for another gauge? I'm in the same situation as you as far as space and I'm thinking about getting the pod from Geno's that sits on the dash for three more gauges . The only question is, since I already have fuel pressure, EGT and boost in my A-pillar, what other gauges can I put in the pod? Maybe exhaust brake pressure, oil temp and rear end oil temp?

 

[diesel4power]

Gauge Location

Geno's has a real nice single gauge pod that mounts on top of the steering column.

 

[JClement]

AUTOMETER has a nice single gauge mount that will fit alongside the shifter housing on stick shifts.