Engine/Transmission (1998.5 - 2002) fittings

[EForbes]

I bought a fuel pressure guage, and was wondering if anyone knew where i could buy a adapter fitting to screw onto my injection pump, the sender came with 1/8 inch npt male, need to adapt to schrader on injection pump. Napa was closed, and i tried Kragen and auto zone with no luck. The latter two have lame selection to say the least. thx all

 

[upsyes]

Take it back...

Take it back and get all of the following from Geno's garage. It all fits and works as it should. The schrader valve core is removed and the line is used to extend to a spot to mount the transducer in the bracket. From there wires go to the dash and the mounting plate replaces the little storage pocket in the dash by the radio.



WESTACH - 2" FUEL PRESSURE GAUGE 30PSI (W/SENDING UNIT)-Dodge Cummins and Ford Power Stroke Diesel Truck Accessories - Geno's Garage



SENDING UNIT MOUNTING BRACKET (WESTACH FPG)-Dodge Cummins and Ford Power Stroke Diesel Truck Accessories - Geno's Garage



FUEL PRESSURE LINE - UNIVERSAL-Dodge Cummins and Ford Power Stroke Diesel Truck Accessories - Geno's Garage



IN-DASH INSTALLATION KIT - SINGLE ('99-'02 DODGE)-Dodge Cummins and Ford Power Stroke Diesel Truck Accessories - Geno's Garage



Eric

 

[Fishin Guide]

Give us a call at the shop of you need a Schrader adapter.



Dave

 

[TMills]

Oreilly Auto had a 1/4" to 1/8" female to female adaptor. I had to provide the part number as the goob behind the counter had no idea what NPT even stood for. I just removed the schrader valve, tightened the adaptor, and tightened the 1/8" male end. I'm not sure about the other stores, but advance and autozone should have access to the adaptor, just have to find someone that is willing to work with you.