? for Mark Craig

[Guezen]

In this previous post https://www.turbodieselregister.com/forums/showthread.php?t=109156

You mentioned a replacement A-pillar so you wouldn't have to cut the grab handle off the stock one.



Could you please post a link where I could view/order one? I looked through http://www.dieselperformanceparts.com/ but couldn't find it.



Thanks I appreciate it

 

[BRayls]

genos offers one in stock color.

 

[Mark Craig]

Guezen,



Just got them up on the site today, the two gauge A pillar picture actually shows a three gauge but you will get a two gauge if you order off the site. The mounts are made using the same supplier and the same material as the DC factory uses to make their factory grab handle pillar. The grain is the same and the color (taupe/gray) is the same. The A pillar bolts on using one stainless steel machine screw, this way you don't have to cut up the factory A pillar top mount one of the overlay mounts. Just take your factory one off, bolt ours on and your done.



Mark @ DPPI