Here I am

Frantz filter installation

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Ute Bullbar

Pac Brake prices

Status
Not open for further replies.
I bought a Frantz filter and am wondering where everybody is mounting them and how ya'll connected them.



I'd like pics if possible.



How hard it is to service the filter?



Thanks in advance,

Mark
 
Mark,

I mounted mine on the fender well just below the passenger side battery. Remove the air filter/turbo hose and there is reasonable access. The mounting bracket has enough stand-off to clear the battery and the filter sticks straight up. I ran the return line to the oil filler cap. Changing the filter is not that big a problem with the air filter hose removed.

Phil
 
It looks to me like it would be easier to get the filter out with the handle down. But then you make a mess. with the handle up the TP roll(filter media) looks like it would be hard to get out in one piece.



Where did you tap for the feed and return? a rough harware list would be nice:rolleyes:



I have a bmk-15 and am going to install the Frantz to see if it gets the soot out better.



I'd change the filter every 3k for 69c.



Thanks,

Mark
 
Status
Not open for further replies.
Back
Top