"Friction Fit" exhaust tip?

[RBSOB]

Just got my MagnaFlow 4" SS system installed! A few minor problems but overall happy with the results. Anyway, the system came with a nice 5" polished, rolled tip that is supposed to slip onto the tail pipe. Well it is not "slipping" more than 1 inch or so and I hesitate to just hammer it into place, but this may be the way to go. Any input on getting these tips on without damage? Thanks Jim G

 

[nickleinonen]

heat the tip in a warm oven [200°] or in boiling water and stuff a bag of ice in the tailpipe to cool it down... then it should slip fit together

 

[Casey Ray]

I sprayed mine with WD40 and tapped it on, same system you have. Went on pretty easy.



Casey