2nd Gen Non-Engine/Transmission front end alignment 2wd

[JRS]

My truck is pulling to the right, even after dealer alignment. I can find the thread for the new alignment specs, but it seems to be for 4 wheel drives. Anything for the front end of 2wds?

 

[Ron Bissett]

Here is the standard reply to your problem ,If you wan't to get it right ,have dealer send you and your truck to a alignment shop in your area that dose the Fire ,Bus, Garbage ,large Motor home, Tractor ,and other large trucks . Ask around look at the lot in front or back of the shop or call the above services as to where they get service most large CO have all there vehicles done at the same place . And thats the way to get it done correctly . That what I did worked for me. Ron Bissett in Metro Louisville Ky P. S here in Louisville its Toney's alignment .

 

[NScott]

Are not the alignment specs for both the 2wd 3500 with the straight front axle and the 4wd 3500 the same? The front ends appear EXACTLY the same except the 2wd doesn't have the "chunk", u-joints, driving axles,etc.







99 3500 2wd, C&C, 5 Spd, etc. ,etc.