Front Pinion Seal & U-Joint #?

[DWestfall]

Did search, came up with nothing. Looking for front pinion seal and front drive shaft U-Joint part #s. Local Carquest couldnt find seal #. Has only the # for the very front U-Joint. I have already replaced rear U-Joints with greasable. Thought that while I had the front drive shaft out, I might as well replace U-Joints with greaseable. Part #s for all would be helpful.

 

[DWestfall]

Anybody?... ... ... ... ..... :{ These are available aftermarket right?

 

[jwilliams3]

Go to www.rockauto.com for the U joints.

For the seal go to www.dodgeparts.com

 

[bighammer]

Precision 464 for front axle shaft u joints

 

[Got HO?]

Anybody?... ... ... ... ..... :{ These are available aftermarket right?

Good luck on finding the seal aftermarket. I'm now on my 6th seal from DC and am still looking for an aftermarket replacement. I also e-mailed AAM about the problems I'm having. They responded quickly but said they are not aware of any problems with seals & wanted info on my truck. Well, after 3 weeks I haven't heard any more from them. I have had similar issues with transfer case seals on a '96 Ram that was only cured with an aftermarket seal from NAPA

 

[rbattelle]

Precision 464 for front axle shaft u joints

Rockauto lists the 464 for the front driveshaft. For the axles it lists:



534G (Premium)

235 (Greaseable Super Strength)

234 (Non-greaseable Super Strength)



I suspect, based on the Precision catalog, that the 235 Super Strength has the grease fitting in the cap while the 534G premium has the fitting in the cross.



Can anyone confirm?



On edit: nevermind, I confirmed it. 235 is a super strength with grease fitting in the cap.



Ryan

[I'm ordering a set because I think at least 1 front joint is fried]

 

[jwilliams3]

Yeah I can... . 464 is for the front axle left and right.

 

[rbattelle]

Where's the grease fitting on the 464? Cap or cross?



Ryan

 

[jwilliams3]

Cross... ...