Engine/Transmission (1994 - 1998) Fuel leak at drain manifold

[DBCooper]

I just noticed a fuel leak that looks to be where my drain manifold attaches to two of my injectors. Has anyone heard of this and also, I assume there are crush washers there. Does anyone have the Cummins part number for them? Thanks for any ideas.

Dan

 

[illflem]

I had one leak quite some time ago, just gave the bolt a quarter turn tighter, problem solved.

 

[Rammin On]

Cummins PN 3903380 for the banjo seals on the drain tube ... might as well replace all 6 if tightening them up doesn't solve your problem

 

[DBCooper]

Thanks for the replies. I tried the 1/4 turn deal, Bill but it's still leaking on the one that I did it to. I'll order the seals today. Any tricks to this one? Do I need to bleed anything? I looked at my manual and it didn't even mention them. Thanks again to both of you.

 

[illflem]

Your truck may run rough for a few seconds after replacing the washers but will pull out of it, no need to bleed.