Here I am

fuel lift pump pressure spec.

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Help! P000f, p0087

carMD

Status
Not open for further replies.
the cp3 is ok between minus five psi to +22 psi most lift pumps set at 8 psi i have never seen one less than 7 or more than 9
 
i just added GDP 2m fuel filter and the guage between it and the cp3 reads 9 at idle.
(i had to make a bracket to fit it in with my bypass on the drivers side but all is well)
 
Status
Not open for further replies.
Back
Top