Fuel shut-off solenoid connector

[P Madrid]

I'm looking to see if any ones has ever found the repair/replacement end connector (plug case and the flat terminals with no wires) on the 12V Dodge fuel shut-off solenoid. I have many new and used Cummins fuel shut-off solenoids with the three round pin weather pack connector I like to convert to the Dodge connector and have them available at the classifies. I do know that Kentworth trucks use the same connectors for one of their battery supplies but I have no luck getting the parts guy to understand what I need over the phone. Any leads would be greatly appreciated.



Thank You



Pablo

 

[HoleshotHolset]

LarryB was researching how to rebuild the P-7100 fuel shutdown solenoids.



I'm not sure if this included the connectors or not...



Matt

 

[P Madrid]

I'll check with LarryB and see what he found out. Thank You HoleshotHolset for the info.



Pablo

 

[HoleshotHolset]

No problem. Keep us updated on your progress... it would be good to know that I could buy a connector if I ever needed to.



Matt

 

[ToolManTimTaylor]

Moved over to the Engine Accy's page for more exposure.

 

[McDowra]

actually I have some of those connector adapters

 

[P Madrid]

McDowra, what type/style of adapter are you referring to? Can you post a picture or e-mail/PM? As soon as I can get the digital camera I will post a picture of the connector housing and terminals.



Pablo

 

[McDowra]

sorry I forgot will try to post a picture tomorrow



Tim

 

[P Madrid]

I have some pictures now but I'm working out of the computer at work. I have to figure out what software will open them to trim them down before posting.



Pablo

 

[BV]

I'm interested - Please post any and all information on the connector. TIA

 

[P Madrid]

OK, I'm back at my computer. Here are some pictures of the connector and the terminal.

 

[P Madrid]

Terminal

 

[P Madrid]

Front View

 

[McDowra]

more pictures coming...

 

[HoleshotHolset]

Cool! Good to see more 'weatherpack' connectors in use... those things work really well.



Matt

 

[P Madrid]

McDowra, is this an end connector off a bad solenoid you cut off and then added the weather-pack connector? This is one style I wanted to offer but if you have them out already there is no sense in competing. If this are new connectors can you reveal your supplier. I would still like to convert the solenoids I have.



I though I had found a supplier, Metri-Pack 280 Series, but were too small. I have follow several leads I received through PMs, Thank You for the info, but still looking.



Pablo

 

[McDowra]

that connector allows you to hook the round plug connector on the shutoff to a dodge truck.