Here I am

Engine/Transmission (1994 - 1998) Fueling question

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Engine/Transmission (1994 - 1998) Hard start. Fuel cutoff solenoid?

Status
Not open for further replies.
Hey guys,
I'm having my engine rebuilt and looking at running a HX40 57/63/18. I'll be running a Hamilton Cam 178/208 with 5x.012 injectors and a TST #6 plate and afc spring kit.
Am i going to have a lot of lag with this setup? It it enough fuel?
Also, the timing will be set @ 16.
 
I can't offer anything about the go fast stuff. However, I recommend you don't get attached to 16. Different engines, different driving styles, different sustained speeds all dictate the best timing set up on a 12 valve. Be open to trying different settings, you might be surprised.
 
Status
Not open for further replies.
Back
Top