Gauge Info

[Archive]

I am looking to install a boost and pyrometer
gauge, I would like to have a 0 to 60 psi boost gauge. Also, i like the white face gauges, but if I can find a good gauge like I described then I dont have to have the white face. I am having trouble finding a full two gauge pillar with the holder for the tweeter. Any info would be greatly appreciated.


"The Blackdog" 2001 24v Cummins,Auto,QC,SWB,
4x4,3:55 gears,Black,Agate Leather,Every Option Available, Straight Pipe,JVD Torque Enhancer,Boost Module,33x12. 50 BFG Mudders on
16. 5x. 9. 75 Weld Super Single II's,Dee Zee D. Plate Toolbox,Bed Rails,Tailgate Guard.


"Dodge Makes It, Cummins Shakes It"

------------------

 

[Archive]

<font color=blue>In the process of having a 0 to 50 PSI gauge made by Autometer in the "UltraLite" Series gauges. See this thread : 0 to 50 PSI Autometer Ultra Lite Boost Gauge

The UltraLites have an "aluminum" look to them. Goto Autometer Website and look around.

You shouldn't need more then a 50 PSI.

------------------

• <font color=blue>
• Eric D. Howard - #ad
  - BOMB'er! - #ad
  - TDR Member since April 8th, 2000
• 2001 Dodge Ram 2500 HD 4x4 SLT Auto Reg cab Cummins Turbo Diesel 4. 10 gear ratio LT265/75R/16 tires
• Patriot Blue Pearl Coat, Agate interior, Leather seats EVERY option, Silencer Ring AWOL</font>

[This message has been edited by KatDiesel (edited 07-16-2000). ]

 

[Archive]

Well personal preferance here, but I ordered a VA CPC from Bullydog, it came with a free EGT guage. I ordered along with it a boost gauge and a two gauge pillar mount.

Well the pillar mount and the VA CPC are great! (Yes I have the infinity pillar mount tweeter).

However the EGT was only a half sweep gauge from Autometer, white numbers/red needle with a range from 600 to 1600. The Boost gauge was from ISSPRO, full sweep, range from 0 to 50, white numbers and needle.

I thought it sucked that they would ship me two gauges that didn't even match in color or sweep stylesand made from different companys, then the EGT started at 600. Kinda useless for those 300 degree shutdowns, or crusing around town at 400 degrees.

So I looked at the TST website, and liked the fact they had gauges that matched. Both from ISSPRO, well they don't carry those any longer. TST has DiPricol gauges now. Very happy with these. Both are full sweep, and closely resemble the factory instrument panel.

Makes for a nice blending touch. Looks like they belong there and light nicely at night too.

The pillar mount was easy to install. I painted with 3 light coats of spray paint I matched up at the dealer. Last can they had, and they were surprised to have it in stock. Might want to check w/ the dealer now to see if the paint is available. May have to order it.

I'm sure TST products has a 2 gauge pillar mount, and I do recommend the DiPricol gauges. They do not show them on the web site yet.

If you like I can send in a picture of mine.

I'd send it now, but left my camera at work.

------------------
99' Quad Cab, 4x4, Auto, 3. 55, All options except fog lights and leather, Glasstite topper, Chrome Nerf Bars, VA CPC, DiPricol EGT & Boost Gauges Pillar Mount, K&N Air Filter, Turbo Silencer Ring Removed