Gauge panel for cubby - hole

[EricBu12]

HI

Got a great thing for all those extra gauges we are putting in.

I made this panel for my gauge to fit in the cubby hole.

If interested in one, E-mail me



Eric





https://www.turbodieselregister.com/user_gallery/displayimage.php?&photoid=1088&width=2





https://www.turbodieselregister.com/user_gallery/displayimage.php?&photoid=1089&width=2

 

[Mactruck]

Looks real good.

Just shot you an Email. I used the Top address on your sig.

 

[EricBu12]

Mac,

Didn't get the E-mail ... don't know what happened... .



try -- email address removed --

 

[EricBu12]

mac,

Got the E-mail and replied. .

 

[cscott]

I am interested can you provied some more info?

 

[Rob Thomas]

What about us guys that have heated leather seats and no cubby 'cause of the switches? I guess I'll have to make a panel for the lower cubby!

 

[EricBu12]

What about us guys that have heated leather seats and no cubby 'cause of the switches? I guess I'll have to make a panel for the lower cubby!

As I only have a certain model and I am not familiar with all the dash styles, I don't know what the configurations are and sush. I have made mine to fit up to the factory holes as you can tell by one of the photos.



If someone that lives nearby me wants to come over to have one fitted so I can make one, then by all means do... . I don't even know what years mine was made, I just assumed it might be 99-02 If anybody can help me on the dash styles and what is what, that would be great.

 

[yogibear]

Geno's will give you a brkt. , or panel just like that. Ask them the next time you order from them.

 

[Rob Thomas]

yogi, are you talkin' bracket for lower cubby on '01 manual trans?

 

[EricBu12]

ramthis1,



That is my setup as well. This is ABS plastic, the same as the winter guards I was sellin' It has a textured surface and looks good.

You just have to cut your own hole for the gauge.



Anybody want one, E-mail me, I have several made.

 

[yogibear]

No Ramthis1, I'm talking about the little cubby hole under the air bag shut off switch. The one from Geno's is drilled for the screw holes and the guage hole is cut out, my Nordskog FP guage fit into it real tight, just the way you would want it to fit.