Gauge question

[Jed]

Does anyone have a good source for quality gauges? I do not mean Isspro or Auto Meter. I need a liquid filled marine type gauge for fuel pressure that I can mount under the hood.

I have been thru 2ea isolators for my Isspro fuel gauge and neither of them were accurate (off by 3 to 5 lbs) and one of them failed after about three months new one has not failed but it reads low. Grainger may have what I am looking for but it is expensive.

 

[Matt400]

I doubt you are going to get any more accurate than a SPA and you don't need an isolator with one of those. Just screw the sensor in and plug in the gauge to it.

If your old school and think electronic is not as accurate as manual then you won't like it but it is as accurate as they get.

 

[ata]

Look in jegs.com online catalog. They have stainless steel, liquid filled, 1 1/2" bezel with 1/8 male npt,brass internals and glass lens. 4 different styles and 4 different psi's 15-30-60-100. look under part no. 555-41040 15psi 555-41041 30psi for the white face.

 

[pwerwagn]

You might also check with livorsi marine. I bet they would have what you are looking for.

 

[ILIANBG]

Marshall is a grate gauge manufacturer. They have a great liquid-filled direct-mount gauge, heavy duty. I know a place in SoCal that sells those, if you want I will look for it and send you phone#s.

Ilian

 

[nickleinonen]

winters and wika also make some good industrial gauges. i know they both make back mount 2. 5" gauges liquid filled