Geno's Check a Spare

[Turbo1Ton]

Have any of you guys bought the Check-a-Spare from Geno's? I bought it and was going to install it the other night but I can't figure out how to mount the end of it. I first thought I could just get a nut and put it through a hole and tighten it down but I can't find a nut to fit it. So I thought I'd see if anyone had any suggestions.



Thanks,



Jeff

 

[CarlJensen]

Got one on the truck and 5ver spare. Go to a bicycle shop to get the nut, same valve. Motorcycle shops have them also. Put mine through an alloy plate on the lower edge of the 5ver and through the license plate holder of the truck. Make sure to check them with leak solution. Mine leaked and I did not realize it until I needed the 5ver spare.

 

[Turbo1Ton]

Thanks! I don't know why I didn't think about one of those places!



Jeff

 

[JVantreese]

I brought the hose out at the lower right side of the lincense plate area and used a plastic zip lock to retain it. It has stayed put for the last year without any problem.