Getting driver's battery tray out

[Blakers]

Whoever installed the Western snowplow on my truck put the headlight relays under the driver's side battery tray. Well one of them is defective or a wire came off and I'm trying to diagnose it. But I can't get the batter tray out! What is the trick once the four obvious bolts and nuts are removed? Thanks for your help.



Blake

 

[illflem]

If I remember right there are 5 bolts, 2 on the lower bracket aim down. 3 are inside the tray itself, 2 of these come out the side, one aims down. No tricks involved.

 

[Blakers]

Thanks. I found two nuts and two capscrews, but no fifth one. That one must be very ellusive.



Blake

 

[Joe G.]

There are two of them that you have to remove from under the fender. Look in front of the fender liner. Pretty easy to do. I think there are a total of six.

 

[Turbo Thom]

Joe is right. Get the two from under the fender. I had a battery to blow up and broke the tray. I found the bolts through trial and error. Kind of pricey too.



. . Preston. .

 

[Blakers]

Thanks guys! Hopefully I can just reach up in there and get the bottom ones without having to pull out the inner fender plastic piece. Perhaps not a bad job afterall.



Blake