Engine/Transmission (1994 - 1998) GM N4500 question???

[BigPapa]

I know we've talked about the gearing differences on the GM NV4500 and our NV4500's but I was wondering if the top and the shifter would interchange and if it would be of any benefit? Anything like the later model Dodge NV's. Mine is a '94 NV4500 which has the long shifter throw and it also seems a little extra sloppy. Will it bolt up? Would it work if it would? Would it be of any benefit like the top and shifter off the late models?



Scott

 

[tlgdiesel]

The 1995 up GM NV4500 used the same top cover as the 1998 up dodge. I have one offa 1995 GM in my 1996. However the shift tower meaning the top part with the 4 bolts that hold it on is different. The threads are larger and the bend is different. I just used a shift lever from a gm and it worked pretty good cause the bottom of it is fat and the factory dodge shift boot fits it snug. If you go this route with a 4wd you will need to modify the transfer case shifter though in 4 wheel low shiftinting between 1st and 2nd the levers hit. I am very happy using the GM shifter set up as it puts the lever in a better position so your not reaching so far and of course it shortens the throw.

 

[BigPapa]

EXCELLENT!Oo.



Thanks, that was just what I was looking for.



Scott