Here I am

Going from 3500 to 2500 regrets?

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Help with Bed Sizes

2007, 5.9, 11.5 AAM rear axle. Need pinion seal

Status
Not open for further replies.
FYI as you were not clear on 2500/3500... A NV5600 is a HO Cummins and only available in a 3500. Trust but verify as a 2500 will have a 5 speed MT.

Be aware the 2005 was the changeover year to a G56. The reverse position will tell you if it's a G56 or NV5600. And I believe a G56, six speed, was offered in a 2500.

My early ‘04 2500 is also a RWD HO 305/555 with NV5600.

.
 
The NV5600 was available from 1999 through early 2005 in 2500's and 3500's. Not sure why you are thinking that they are restricted to only a 3500.

Yup my buddy has an 05 3500 dually with the 5600 and I had a 05 2500 crew cab long bed with it as well. Cutoff build date was like March from what I've seen.
 
FYI as you were not clear on 2500/3500... A NV5600 is a HO Cummins and only available in a 3500. Trust but verify as a 2500 will have a 5 speed MT.

Be aware the 2005 was the changeover year to a G56. The reverse position will tell you if it's a G56 or NV5600. And I believe a G56, six speed, was offered in a 2500.

The HO only being a 3500 option was never a thing on the 5.9, only the 13+ 6.7's. The Aisin is also the only transmission that was restricted to a 3500, since it's mated to the HO. All other transmissions were available on 2500 and 3500 trucks.
 
FYI as you were not clear on 2500/3500... A NV5600 is a HO Cummins and only available in a 3500. Trust but verify as a 2500 will have a 5 speed MT.

Be aware the 2005 was the changeover year to a G56. The reverse position will tell you if it's a G56 or NV5600. And I believe a G56, six speed, was offered in a 2500.

FYI - I have a 2004 2500 with the NV5600.
 
Status
Not open for further replies.
Back
Top