got an enclosed trailer problem

[rivercat]

I bought a 24ft black snclosed trailer from a local auto shop. I got a good price and was able to do all new 10 ply maxxis tires and all new backing plates on the axles for less than a new one. But the trailer has huge decals advertising a bike dyno that was mounted inside it at one time and they are too far gone to peel off. So my options as I see them are strip it and run it in the bare like an air stream or lightly sand the paint off and shoot it with some sort of enamel like what they sell at tractor supply. What would you guys do????

 

[RustyJC]

Try the 3M Stripe Off Wheel. You should be able to find them at an auto body supply house.



Rusty

 

[AABEN]

Take your wife hair drier and heat them they will come off.

 

[ABennin]

Those 3M wheels work good on old brittle vinyl. I spent 8 hrs removing a business decal from a trailer I bought with it. If you are careful you won't take paint off with it.

 

[mainer29]

Try WD40. It will dissolve the glue holding the sticker. Also this.
30 Helpful Items To Remove Sticky Adhesive Goo
30 Helpful Items To Remove Sticky Adhesive Goo : TipNut.com

 

[rivercat]

No the paint is just as bad I tryed an actual heat gun and it was either paint and decal or nothing. The trailer is a 93 and decals are like 8 yrs old. It's all or nothing the decals are baked in and paint just to weak for a stripe wheel.