Guage suggestions

[Texas Diesel]

I am looking for a boost/pyro/fuel pressure setup. I cant seem to find a source for all three. Any suggestions? Thanks

 

[fj40charles]

Texas Diesel,



I went with the Autometer gauges (0 - 60 PSI boost and EGT) and a Westech fuel pressure gauge that Geno's Garage sells. The autometer is pretty much straight forward intall. The fuel pressure will be a little more tricky on 2000 and newer trucks.

You can go with a 4AN to 1/8 NPT fitting on the banjo bolt on the fuel filter canister or use a modified banjo bolt that Ray sells. The ones Ray sells has the 1/8" NPT thread tapped so you can install

it with ease using a hose from a grease gun.



Also, I went with a triple pillar gauges (also from Geno's)



Here is Ray's contact info:

Raymond L. Torresdal

rltco@acegroup. cc]



Hope this helps...



Charles

 

[EMDDIESEL]

Autometer makes all three, check out www.autometer.com and find the sizes and styles you want, thengo to www.summitracing.com or another discount dealer and order the ones you like. They will all match

 

[mediccummin]

Gauges

I second EMDDIESEL's suggestion, thats exactly what I did. I found what I wanted on the Autometer site, then went to Summit and ordered them. Had my gauges in 2 days, A pillar in 5. I also think they where the cheapest at Summit . Good luck. Dwayne

 

[Randy J]

Here's an email I received after an inquiry about guages:



From: -- email address removed -- [mailto:keith@dieseldynamics.com]

Sent: Tuesday, June 05, 2001 11:36 AM

To: Jones, Randy

Subject: Re: Gauges



At 06:55 AM 6/4/01 -0500, you wrote:

>How much is the triple gauge pod w/ the 3 custom Autometer gauges? 98. 5

>Dodge w/ premium sound system (tweeter). Thanks.



$340.



Thanks for your interest in Diesel Dynamics' products.

Keith Lockliear

Diesel Dynamics

800-628-8111

 

[Texas Diesel]

Thanks for all your input. I ordered a pyro and boost guage from Genos Garage. The elusive fuel guage is still on the list however, I am considering upgrading my fuel lines so I will wait on that to be completed.