halloween howl meet & spook in lower mich

[DieselTweaker]

knowing both TJ and Greg's wife it's hard to tell what those two would come up with,,,, scary's the crap out of me LOL

 

[Graphic man]

knowing both TJ and Greg's wife it's hard to tell what those two would come up with,,,, scary's the crap out of me LOL

i would love to be a fly on the wall for that one :-laf :-laf

 

[Holysmokes]

SHOOT..... I would too!!!! :-laf Just to see what they came up with

 

[Holysmokes]

Oo. <-------Thats me as the fly

 

[Graphic man]

Zach... ... . hand me that fly swatter :-laf :-laf :-laf





TJ said she would use her shoe :--) :--) :-laf :-laf

 

[DieselTweaker]

that's funny !!!!

 

[Holysmokes]

ok i can take a hint

 

[Babyfat]

Ok My Truck Threw Codes 0753, 1765, And 1693 Anybody? Help Chaz Zach Anyone

 

[Graphic man]

P0753 (M) Trans 3-4 Shift Sol/Trans Relay

Circuits

An open or shorted condition detected in the overdrive

solenoid control circuit or Trans Relay Circuit in JTEC RE

transmissions. Was MIL code 45



P1765 (M) Trans 12 Volt Supply Relay CTRL

Circuit

An open or shorted condition is detected in the

Transmission Relay control circuit. This relay supplies

power to the TCC



P1693 (M) DTC Detected in PCM/ECM or DTC

Detected in ECM

A 9Companion DTC9 was set in both the ECM and PCM.

 

[Graphic man]

check the fuses and the relay under the hood for the trans



hope this helps



Scott

 

[Babyfat]

Fuse Good , Relay Has Jumper In It Maybe Smartbox?(unplugged going to try)

 

[Graphic man]

it could be try and un plug it



i am sure Chaz would be a better guy to talk to on this one !!

 

[R-N-R]

John, Do you have a DTT smart controller?

 

[Babyfat]

John, Do you have a DTT smart controller?

YES I JUST UNPLUGGED AND WILL DRIVE TONIGHT SEE WHAT HAPPENS

 

[IC Smoke]

what does the controller do?



Ian

 

[Babyfat]

Changes Shift Points And Lock Ups

 

[Graphic man]

they are nice but the DTT is something like $500 :{



i have already giving DTT my first and second born

 

[pro99]

Hey all sorry im late just got done working on a 12 valve for p-pump and timing. John did the check engine light come on and that’s why you checked codes? Did the Trans shift funny? What are the start sense set? To me the codes for Trans are normal per jumper but the 1693 means you better look in the ECM.



Well I want to make a shout out to Bill, Scott, TJ, and Frank we should do another meet at bills house for old time’s sake. Give Bill a hand in studs not sheep stud. Sorry Greg I'm sorry for that (whatever) :-laf

 

[DieselTweaker]

I GOT NOTHING..... but it look's like scott and chaz has it covered.

 

[pro99]

Thanks for posting partsman I was starting to wonder. I show up and everyone leaves