Here I am

Hella 4000 Lighting

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

2.25 Series Shocks, look what the UPS Man brought today

Aftermarket Posi for American Axle 11.5"

Status
Not open for further replies.

CAHancock

TDR MEMBER
I have had two Hella 4000 driving lights on my work bench for eight months trying to find an after marker bumper to add on to where the tow hooks are.



The first one I ordered was from the guy in Phoenix Arizona and he said, Oh yes this will take the Hella lamps. Well I put the lamps on but the hood would not open. Ok sent the Bumper back.



I called KC lighting in Arizona and Oh yes this bumper will work with those lights.

again the light went on and no the hood did not clear the light.



I did a search on TDR again and found a post on Defiant Truck Products. Called them in Orange California (714-997-9111) and Paul Fox picked up. I told him I had these Hella 4000 and was looking for a font bumper to mount them on. He said he had 29 in stock what would work. I said, are your sure it will work with a 05 Dodge and he said, I am looking at one in my shop right now that has three Hella's mounted on it! That was on Thursday and I got it on Friday!
 
Out of curiosity, was one of them the randy ellis designs light bar? I had one on my 05 (stolen)... . and it wouldnt fit the 4k's... . the 1k's were fine..... have one for my 06 but it's not installed yet, just going to use black majics (1k's)



JG
 
Hey, Bob, what type digital camera did you use? What size pic's... Thanks, Eric



'03 qc slt swb srw 6spd 4x4 white limited 305/555 stock 53k
 
Hey, Bob, what type digital camera did you use? What size pic's... Thanks, Eric



'03 qc slt swb srw 6spd 4x4 white limited 305/555 stock 53k



The owner of the truck on the far right took the pics,so I can't answer those questions,sorry.



Bob
 
I'm using a Westin POS bar on mine. Had to re-inforce the the mounting plate with 1/4" flat bar stock so that the lights wouldn't vibrate... ... .....

#ad
 
I'm using a Westin POS bar on mine. Had to re-inforce the the mounting plate with 1/4" flat bar stock so that the lights wouldn't vibrate... ... .....

I have had to work around way too many of those bars,they are veryflexible. :-laf



Bob
 
Status
Not open for further replies.
Back
Top