Archived help part discontinued

[MCharlebois]

looking for the 4 inch high pressure line from the power steering pump to the T where it goes into the block



any help will be greatly appreciated



marcel



94 ctd auto

 

[mwilson]

I'm trying to picture this line. Does it come from the vacuum pump rather than the P/S pump??? Who has discontinued it, Dodge or Cummins???

If it is the line from the vacuum pump and you have only tried Dodge, give me your Engine Serial Number. Left hand side of engine, plate is riveted to the side of the front cover. Serial number is 8 numbers long.

Let me know so I can try to help you.

If it is simply an oil pressure feed line (which I suspect it is) then you can also have one made up. Most Truck and Equipment Dealers have hose and common fittings on hand, I know I do.



Mike.

 

[MCharlebois]

it is the oil pressure feed line ,it is steel braided in the middle ,truck is not here but i will get the serial number

thanks marcel

 

[mwilson]

Number 14, right??? I used the ESN from the '94 that I used to have. Still should double check it once I have your ESN but most likely the same part number.



3925100 is what I come up with. Nothing available through Cummins Northeast and I can't check the factory stock until Monday.

 

[MCharlebois]

yes it is number 14

my serial # 56176953

thanks marcel

 

[mwilson]

Yep, 3925100 is what you want.



I don't see any warnings that it is discontinued through Cummins.



Your set-up comes up a little different than my old one but uses the same hose.

Sells for 55. 00 to 70. 00 depending on dealer mark-up.

As I said above, I can't check the Cummins factory today, I will Monday if you want. Then you can call any local Cummins Certified Dealer, including the truck dealers and they can order it for you. If you fly it in, figure another 20. 00 for freight.



Let me know Monday if you want me to check for you.



Mike.

 

[MCharlebois]

mwilson i apreciate all your help i called green mountian kenworth (cummins dealer) in shelburn vt gave him the part number ,he said they deal with six distributers and could not find one ?? so i called the local dodge dealer with the part number and as they put it stumped them??

must have been friday i guess

marcel

 

[mwilson]

Green Mountain Kenworth did the same thing I did, they just phrased it a different way. Any of us with Cummins franchises / dealer agreements in the Northeast deal with Cummins Northeast. They have 6 locations and we dealers can see what is on hand at those 6 locations.

What we can't see is if the Cummins Factory has stock.

We need Cummins Northeast to do that for us and they were all closed Friday due to the long Holiday weekend.

When they reopen Monday I will have them check factory stock and let you know.

Then I will advise you so that you can have Green Mountain or whomever order it for you.

In the event the factory has it, your choices will be to wait for it to come in on a stock order or fly it. Cummins Next Day Air freight charges are fair and based on the price of the part rather than weight.

Don't worry, the factory most likely has it. If not other Cummins dealers in the USA may have one.



Mike.

 

[mwilson]

Good Morning Marcel,

Just checked with Cummins Northeast and the Cummins factory has 51 of those hoses on hand.

Just have Green Mountain or whoever order that for you. As I said, the only thing you need to decide is how fast you want it.

If I can help with anything else, please let me know.

Have a good day,



Mike.

 

[MCharlebois]

thank you mike,



ordered 1 this am 60. 00 bucks plus fifteen to have it here tomorrow



once again thanks for all your help!!!!!!!!



marcel