Archived HELP Trani lost reverse....

[pipeguy]

HELP...



I had a NADP RACE-X trani installed last week and when I started it up this afternoon I had no reverse.



I feels like the clutches are slippng in to reverse and moves a tiny but but has no power. All other shifts seem fine.



The fluid levels seem fine (warm -neutral - parking brake on).



It is cold here ... -9 degrees Celsius. But its not that cold. Truck was plugged in to a block heater ... .



NO CODES THROWN ...



HELP PLEASE >>>>



Will driving it make it damage more... 88km to the shop that installed it. . ?



ANy quick fixes or suggestions????





HELP... .

 

[raychem]

HELP...



I had a NADP RACE-X trani installed last week and when I started it up this afternoon I had no reverse.



I feels like the clutches are slippng in to reverse and moves a tiny but but has no power. All other shifts seem fine.



The fluid levels seem fine (warm -neutral - parking brake on).



It is cold here ... -9 degrees Celsius. But its not that cold. Truck was plugged in to a block heater ... .



NO CODES THROWN ...



HELP PLEASE >>>>



Will driving it make it damage more... 88km to the shop that installed it. . ?



ANy quick fixes or suggestions????





HELP... .

From your statement above I gather that first gear is working. If it is unfortunatly you will have to drop the pan and check the rear band. Loosen the band nut w/ a 14mm or 9/16 wrench. Torque the stud to 72 in pounds, loosen the stud and re-torque to 72 in pounds. When this is done back off the stud 3 full turns, hole the stud and tighen the lock nut. Let us know.



Richard

 

[pipeguy]

Did end up being the reverse band was snapped. . rear drum was burnt up as were the clutches... Was rebuild by a local builder



Today durring daily driving ... lost 3rd, OD and reverse...



Back in the shop AGAIN... .



I am sick and tired of trani problems... .



All I keep hearing is should have bought DTT... ... .





#@$%!



NADP is saying they have there "BEST " Parts in the trani..... ?