help with powermax cr

[KevinO]

I can't get any power to the inside controller on the 600 do you have to tap different fuses than what the instructions say 27-28 but they are the overhead console and powermirrors. That doesn't seem right. Any other ideas would be appreciated.

 

[mattymac]

I belive that those are just 12v ignition on switch taps. They worked on mine? Double check your ground and the plug that goes to the remote.

 

[KevinO]

i power going into the box but the ground i think is what is screwing me up. Do you know which one is the ground that goes into the main box. i have unplugged and plugged them in several times with no luck. Jumping the negative from the battery to the pin on the display gets it to light up but i don't want to start it if it's not right.

 

[KevinO]

My ground is bad inside the main box. I guess i will be shipping it back tomorrow. now i don't have a ride to work I hope i can get another one sent out pretty quick.

 

[SRadke]

My ground is bad inside the main box. I guess i will be shipping it back tomorrow. now i don't have a ride to work I hope i can get another one sent out pretty quick.

Just unplug the main harness and drive the truck until you new box comes in. That should only take 15-20 minutes.



-Scott

 

[KevinO]

They said this is the second box they have ever heard of doing this. I have to take all off and send it back. This is a pain in the butt. So much for having it by monster mopar weekend at gateway.

 

[GWoody]

Cheer up ol boy, it's a minor setback, once you get that thing working right it'll feel like there's two 600's pushin that truck down the road.

 

[mattymac]

Cheer up ol boy, it's a minor setback, once you get that thing working right it'll feel like there's two 600's pushin that truck down the road.

Aint that a fact! :-laf