Archived help with starting issue

[gottorq33]

okay think I got all leaks fixed it appeared #4 was not seating to connector tube good. let it idle and went for ride and it still looks dry. Now new problem after truck sits it doesnt want to start I have to cycle lp then crank for a couple seconds it seems to run fine what could problem be???????? is air still getting in or are injectors leaking into oil help please it is driving me nuts

 

[AKAMAC]

The first time I did mine, as I was going over all the injector hold-down bolts, I noticed that #6 was a little higher than the others. I removed the injector line and cross over clamp then used a small screwdriver to pry out the the connector tube slightly. The injector droped about 1/16" and all was good.

I bring this up because it sounds like you are bleeding air back into the system. I would also look at filter cap gasket and fuel lines. Good luck! Mike