Competition Hitch Height

[Stroke This 24V]

Does anyone know of a standard hitch height for truck pulls?



What about a place to get axle trusses for front and rear?



Also what about a driveshaft saftey loop?

 

[MMiller]

Here in Iowa where I pull in the summer its almost always 26" hitch hieght. As far as axel trusses it depends on where we are pulling and your class. The places I pulled at if its a stock class or even modifed street class there is no traction enhancers allowed ie ladder bars, traction bars etc. although most places let us run block between the axel and the frame. That doesnt let the truck squat and wrap up the rearend and break the u joint. The classes I pull in with my diesel I don't run any thing but stock springs and I haven't had ANY problems.

Hope this helps.

 

[JTeague]

Its 26 inches here in Missouri. We are not allowed to have blocked suspension or axle truss. Safety devices are always encouraged. I developed a trick set of shocks that I use to keep springs from compressing . They look factory and keep the truck level an bounce free.

 

[DarrellB]

26" here in Indiana to. We usually only pull a 7,500lbs class but I think it's going to change next year but not totaly sure. Every body kind of likes to 7500lb class not to many truck over that unless they are 4 door duallys with alot of extra I TRIED TO BY-PASS THE CUSSING FILTER on them. Also no Propain or Nitrous, or water injection.



Big D