Hole Saw

[Archive]

I have my psychotty system ready to install, but I dont have the 4. 5" hole saw. So off to the local harbor freight, then Home Depot, Orchard Supply hardware, then to an electrical contractor friend, and no one had that size. I am temped to use my sawzall with a metal cutting blade and carefully remove the 4. 5" hole that I need. Any thought on a better way???
What we could do is buy one, when found, then ship it around when someone needs it. Whom ever needed it would pay the shipping for the use of it,,what you think??? #ad


------------------
RICK
97 2500,CC,5 SPEED, 3. 54 Limited Slip,Psychotty System,K&N, ISSPRO 3" Pyrometer
12,000 RBW 5th Wheel Hitch

 

[Archive]

I have one I could ship. E-mail your address and shipping preference and I'll get it out today.

 

[Archive]

Someone suggested going to a car stereo shop. They have the sizes we need for the Psychotty. I`m guessing 10 bucks maybe, they`ll cut a hole.

A 4 1/2 " Starrett hole saw is forty something bucks. Not counting the arbor.

[This message has been edited by HEMI®Dart (edited 05-17-2000). ]

 

[Archive]

What are you guys using a 4. 5 hole saw on the physcotty system? Did I miss out on something I've got the filter and prefilter but I'm not sure what the hole saw is for. Let me know. Thanks. DD

------------------
95,000Miles!

Yes 'mam it is a rolling office/bedroom/pickup/stinkpot/the best truck ever made!

1998. 4 4x4 Quad Cab 2500. 285/75/16 White w/gray trim. TST#8 plate. Limo tint ALL Windows, Whistler hidden radar built into overhead dash, Combo toolbox/41gal tank, electric start, Car Alarm, Lund Grill Covers, Electronic Idler, scotty's air intake, K&N Prefilter, Hadley Bulley Air Horns Mounted Bumper Level, and more to come.

 

[Archive]

RHarvey:
Could I PLEASE borrow the hole saw when you're done with it?
Alaska Bee: I promise I'll take good care of it. Cutting the hole in the firewall is all that's hole-ing me back from installing the Psychoty.
TIA.

------------------
'94 SLT 2WD, 5 Spd. , TST #6(250/635), 215 HP Injectors, 3. 54, Synthetics, By-Pass, Gauges, Scotty K&N, BD Exhaust Brake, Horton, 4" Exhaust, Prime-Loc, Engine Chrome Kit, Gutted Cat, Air Lifts, PIAA's, 255x85Rx16's and copious amounts of 12v Pride.

 

[Archive]

DieselDunn, The Psychotty Air slips through to the cowl via a 4. 5" hole. You must have the original Scotty Air which is the K&N RE-0880 by itself.

I have a 4. 5" Starrett hole saw that I will be bringing to May Madness. Anybody needs it, track me down. Just look for my truck.

------------------
98. 5 3500 QC 4x4
Driftwood/ Grey Int.
5 spd, 3. 54
PowerMax2, 19. 5" Alcoas, 245/70-19. 5 Michelins,
Ranchhand bumbers and toolbox, dual 3" with 5" tips, "Scotty Air System", Centerforce Dual Friction clutch, Autometer Gauges, Cobra CB, Sony CD player, Polk Audio Speakers, Upgraded fuel lines from tank to injector pump. Coming this summer: JRE 4" exhaust, DD stage III, McLeod dual disc clutch.

69 Z-28 Camaro, Silver/Black, original motor, 58,000 miles

Building: 32 (Censored) 5 Window, "American Graffiti" replica