How much power without programmer?

[mymtnhauler]

How much power can one get out of a 3rd gen 5. 9 with out adding a programmer? Injectors, modified CP3, turbo or twins, can any of this be done without added fueling?

 

[JDiepstra]

I don't know how much but with injectors and modded CP3 you will be adding fueling.

 

[DerekW]

dont forget in the way of a mechanical buildup for power-bumpstick, headwork, intercooler, water injection (if your drinking it and or cooking with it than its probably safe enough to put in your engine and dont cost money in some locations), etc.

 

[mymtnhauler]

Yes a modified CP3 and injectors will ad fuel. I want to know how much can be done at stock settings.

 

[moonranch]

At one of our dyno meets we had an '04. 0 truck that the programers were not working. When he took them off the truck ran 466hp. He had 70hp injectors and a different turbo.

 

[MA2LA]

I think industrial injection had a 06 that was almost to 700hp with the stock software just using injectors, turbo and i belive dual cp3, and of course intake and exhaust

 

[Tomeygun]

How much power can one get out of a 3rd gen 5. 9 with out adding a programmer?

I am not sure what you consider a programmer (bullydog, smarty, ppe), but I hit 600 with injectors, TST, modded CP3, and turbo



At this point I am staying away from writing to my ECM because of the very-rare chance it could mess something up and

 

[Bob4x4]

What it sounds like you are asking is by adding air flow. There are gains in torque from air flow enhancements. The #s just won't be as impressive as wit adding fuel. Here is an example dyno. Bone stock 06 with just an AFE intake added. the best part is the gain is at the rpm we drive in daily... ..... not just on the track.

#ad




Bob