how will this hold up in my truck

[XcumminsX]

hey guys i am looking to take my truck to the next level. This is how my ideas are coming on what to do to bomb my truck.





Please keep in mind i NEVER tow with my Truck. Never have any load in the back. NEVER NEVER NEVER Oo.



Plan is



-AFE Air Intake complete system



- 5" stainless steel exhaust (or should i get the 4" )



-New edge will set on 100 r. w. h. p. 24/7



- DDIII injectors 100 hp



- What Do i need to do for my turbo? Many of you may not know about Ricer turbos but i can get 50% off any turbo i want. Friend owns a RX-7 shop. here are some of the turbos id be able to get my hands on for 50% off...



i have a 48re what do i need to do to that i wont buy a hole new trans









thanks

 

[rbattelle]

I'll chime in

I would be extremely careful with mouting little ricer turbos on your truck. Remember, you need to match your exhaust flow capacity to the turbo (both from the engine to the turbine and from the turbine to the tailpipe). That means very carefully choosing your exhaust system, for 1 thing. And be carefuly choosing the 5 inch system... some have reported loss of power and TOO LOUD. If you're going with the 5 inch, be sure to calculate your air flow requirements for matching your turbo(s) (as I mentioned).

 

[CATCRACKER]

you can use a 5" system with the mods you are planning to do. you will need to move alot of exhaust when blowing out 500 ponies.





b1-b turbine

 

[XcumminsX]

With those mods i am planning to do shouldnt i have around 500 RWHP? if it is under 500 i will get the 4" Also. what about my trans. Would just getting a ATS converter puls a vlave body hold up to nearly 500 rwhp. REMEMBER i never haul/tow anything ever!