I got Bob V's supershifter

[tpruitt]

Well i got it today and i cant wait to get it all put on. for those of you who have it how do you hide all the lines running up the shaft. If you have Pics that would be great. Once it clears up here i am going to put it on.

 

[CumminFast]

Hey man this is off the subject but I checked out the photos of your truck and I think your truck is BAD!! Man I like that tractor too. The back-end isnt even sagging when you are pullin it! How much weight is that?

 

[tpruitt]

Thanks man, The tractor weighs probably between 10k to 12k. i am not really sure. With the rear add a leafs the truck rides like a bord. I was not even on the overloard springs yet. i wish there was some way to fine out how much weight it would take to get me to the point were the overload are actually funstional.





Trey

 

[y-knot]

Hey I like BOB's shifter so much I ask him if they had a way to mount it on the transfer case shifter, couldn't do it, but I still think it looks cool.

 

[GiesJ]

tpruitt-

Get a hold of Whitmore - he used pipe insulation to hid the wires on his shifter from bob V. Once I do the wiring I'll probably just zip tie it as neat as possible.

I agree with CumminFast - you have a kick A looking truck. How you like those mirrors?

Jason

 

[tpruitt]

ok first thanks for all the good comments. 2nd I like the size of the mirrors but one thing that i don't like about the Passenger side is that for one it does not sit on the same angle as the driver side and 2 the bottom of the mirror is below the window so that bottom part is pretty useless. I thought that it was going to help with the blind spot but i don't think it did. what help the most is the little round mirors that i put on the bottom of the glass. Ok for all of you who have the shifter kit my switch seems back wards for the exhaust brake. do you all have any ideas on how to fix it. When the switch is down the brake comes on when it comes up the brake goes off. i think that its suppose to be the other way around. other than that everything is working better than i was expecting.

 

[tpruitt]

OK well i talked to Bob V tonight and he got me all fixed up. He is a great guy to work with i would highly recommend him if anyone is thinking about a two wheel low kit on.



Trey