I have a bombing question

[Barry's Ram]

I would like to do some bombing to my truck but i want some one to do it for me does any body no of any body in the clearwater florida area that does this. Thanks for any help you ca n give me. Barry

------------------
2500 2001 loaded except leather all stock 354rear end 4x2

 

[work2muchplay2little]

You might want to try contacting some of the vendor/installers that are discussed on this list frequently as some have shops that they have qualified to install their products outside of their own areas. ie. Diesel Dynamics, Jannetty Racing, Blue Chip Diesel, BD, Banks, etc. Good luck #ad
Have to add that it is a ton of fun to DIY and have the satisfaction that comes along with it.

[Edit: meant DIY]

------------------
Kurt Voss
********* 1999 2500 24VCTD AUTO 4x4 QC LB Laramie SLT, Luverne stainless steel nerf bars, 3 piece bug deflector, mopar mud flaps, Line-X bedliner, Blue Chip Fuel Management System (Premium), Psychotty Air, DD3's,TTPM, DD 4" exhaust, HX40, DTT VB/TC(91%) , Mag-Hytec transmission pan... YEEEEEHAAAA!!

[This message has been edited by work2muchplay2little (edited 04-29-2001). ]

 

[Archive]

Another option is to watch the TDR for members in your area, and start a getting together with them. We did that up here in the northwest, and now we can do a lot of different mods to these trucks, with confidence!
Not only do you get the labor free, you meet all kinds of good, honest people. I leave my house unlocked for these guys when they are around. Everyone I have met has been very trustworthy.

 

[Mopar-muscle]

barry do your homework first , going to a shop could cost you alot more than just money and time . if you go into a shop that does it all uninformed you could end up leaving with a lighter than needed wallet and with alot of parts that will do nothing more than look pretty . #ad


there are many threads on this forum with more info than you could ever want , email some of the people , ask questions , it don't take much to make the cummins fun to drive , and it desn't take much more to make the cummins break stuff bolted to it . #ad

 

[RichB59]

When I was ready for gauges 3 on the Apillar) I called a shop in Vegas and was quoted 650. 00 parts and labor. After some encourgement from the guys on this web site. I bought the gauges from diesel injection services and installed them myself for about 275. 00 and like they say it felt great.

Rich

------------------
20yr Mopar Parts Manager,"June of 2000" 2001 quad cab,2wd,auto,Camper pkg,354 LSD rear axle,Raven Magnum 8' cap. Mag Hitech trans pan. Isspro gauges pyro,trans and boost Apillar mount. Amsoil air filter. No muff!EZ Edge!!!! N. R. A. member