I need a 5th wheel hitch

[RustyJC]

I installed the B&W turnoverball gooseneck hitch in my 2002, and it probably took 4-6 hours to install the hitch and the 7-pin connector in the bed. For my 2011, I farmed the installation out to a B&W dealer here in town, and he installed the new B&W gooseneck and the 7-pin connector in the bed in a little over half a day.



Rusty

 

[HookMeUp]

I would also like to install a 7-pin inside the bed. Is a harness available that is plug and play?

 

[EricBu12]

Wire harness, here you go.

CURT 56071 at AutoAnything


The Hard part on our new trucks is the hydro form frame. you have to fish the bolts through the frame to the pre-done holes to mount the brackets. That was the hard part. . . There is an elongated hole on the bottom of the frame toward the rear. you have to fish the bolts from here to the mount holes where the brackets go. after that, the careful measurement of the bed to drill the holes. then all you have to do is mount the hitch.