2nd Gen Non-Engine/Transmission I need help: 2 questions:

[jsimpson]

1. I have a fuse for power seats in my 94 RAM Cummins one-ton. Is there a lead under the dash for power seats? What colors are the wires?



2. There is no ABS relay in my under-hood fuse box. There is only one terminal in the space for the ABS fuse. If all 94 one tons have ABS, how does it work? I've got a valve body below the master cylinder with about a four-pole electrical connector running to it, but what does it do? Mine doesn't pulsate when the rear wheels begin to skid, it just cuts the rear brakes out altogether. That gets kind of nerve-wracking in heavy traffic!!!

 

[jsimpson]

I pulled the lower driver's side dash panel and identified the red/light grey wire as being the fused side of the power seat fuse. Couldn't find a loose end of it anywhere, so I spliced into it and ran a wire under the floor mat to hook the seats to.

As for the ABS, my research tells me it's probably the two way solenoid valve. I'll have to spring for a new one I guess, because they're probably not rebuildable or even clean-out-able. :--)