I need some addresses please.

[Truckie]

I need some address please.

Well I don't want to start a war here, but I would like to have a few links and web address to some of the clutch company's that are out there and that everybody is using. I want to start doing some research on this subject before I put a new clutch in my truck.

That will be early next year. Thanks.

MIKE

 

[ThrottleJockey]

Get comfortable, grab a cold one, and try the search feature.



Man, there's DAYS of reading on this site on clutches!



Brian

 

[csevers]

The good ones are Haisley Machine ,South Bend and Enterprise Engine .



www.haisleymachine.com

www.Enterpriseengine.com

www.southbendclutch.com



All three offer Sled Pulling (heavy duty streetable) cluthes and lighter models to fit any ones needs.



Craig

 

[Deezul1]

Look in the LINKS section of this web site, there are a lot of good vendors there.

 

[Vaughn MacKenzie]

Southbend.

I had the Southbend in my 2001 HO and was very pleased with it. Smooth yet positive engagement, light and smooth pedal effort, and easily held the power (albeit it was only 352hp max). Peter also got me shifting better than ever by sending me a new clutch slave which worked much better than the stock unit, and for considerably less $$.



Vaughn

 

[Dsul]

I've got no experience with them, but about a month ago a member was talking about a good experience with SPEC clutches. Just information to fuel the fires a bit

andy

 

[Mad Bomber]

Clutch

Southbend the ONLY WAY,and peter is a great guy

 

[Forrest]

http://www.mcleodind.com/

 

[Hammer]

Mike. .

I have the EEP double disc pulling clutch. I wouldn't have any other as it just flat works. When you need to drop the hammer on it you do not have to worry about it slipping at all. If you'd like to drive it let me know and I'd be glad to make arrangements for you to do it... ... ... Andy

 

[Truckie]

Thanks Andy I really would appreciate that. Lets try the next time we meet, thank you again. I know doing a clutch isn't cheap but What you said is what I'm looking at and worrying about

When you need to drop the hammer on it you do not have to worry about it slipping at all

MIKE

 

[MO'Donnell]

Mike -



Definitely take Andy's truck for a spin, it is one INCREDIBLE ride. If you think Brad's truck is clean, wait till you see Andy's!



Andy - Did you get in touch with Bo for your mudflaps?

 

[Hammer]

Truckie. .

I am in town from Friday early till Sunday afternoon so I am home most all weekend now. If you want to set a day to do it Friday or Saturday is best for me. I can either meet you halfway or take a road-trip out there and let you do it. My clutch went AWOL the week of the big Chrysler show at Carlisle in July and EEP squeezed me in so I would not miss it. I was and still am very grateful for that and the quality piece they installed. From the truck getting onto the lift to the test drive took about 4. 5-5 hours. That also included me having the 5th gear nut addressed.



I looked at and priced all the units available,and there was alot of them around,and then made my decision. One MAJOR determining factor was the constant abuse Sled Puller gave his in double duty. I know he has had it out and upgraded,but,the initial assembly was brutalized and never broke or left him sit. That was the selling point to me,if it lived while he drove it and pulled it a normal driver would benefit even more. I also understood that nothing is perfect and anything could happen,but,so far it has performed flawlessly and works when its needed. Let me know if or when it suits you,maybe we can get O'Donnell to buy us a steak if I drop in the area,LOL .



Mike. .

No as a matter of fact,I did not. It seems like the Mrs has sent the paper I printed off with the contact info for there away . So please send me it again I would appreciate it. Also thanks for the flowers on my ride and Brad's is one sweet ride also,when you get to see it. I think he is M. I. A. or the aliens have captured him,I haven't seen or heard from him since last year sometime... ..... Andy

 

[Truckie]

Thanks Andy I'm not sure what this week end is all bringing I have to work this Saturday and not sure when I will be done. If not this weekend let me know when you get back and then we can meet see hot that clutch drives. Thanks again.

MIKE.